EMS Physio Primo Combination 860

The EMS Physio Primo Combination 860 is a dual frequency ultrasound device combined with 2 channel stimulation.

In Stock
£1,695.00

* Required Fields

Description

The EMS Physio Combination 860 offers dual frequency ultrasound and the complete range of stimulation outputs (including interferential) from one simple to use unit. Both modalities may be used individually or in combination.

  • Two year manufacturer's warranty
  • Touch screen technology
  • Clear, graphica user interface
  • Evidence based treatment protocols and dose algorithms
  • Easy to clean - reducing potential cross infection
  • Simple to set up
  • Lightweight and portable
  • Mains powered as standard
  • Optional rechargable battery available
  • Optional small ultrasound head
  • Dual frequency ultrasound (1MHz & 3MHz)
  • Stimulation outputs: two and four pole Interferential, Diadynamic, TENS, Sinusoidal, Galvanic & interrupted Galvanic, Faradic, Trabert, Medi-Wave, Russian & Microcurrent output
Treatment Protocols
  • Pressure Ulcers
  • Chronic Venous Ulcers
  • Trigger Point Low irritability
  • Tendon Injury/ Lesion
  • Chronic Osteoarthritis
  • Rheumatoid Arthritis
  • Tennis Elbow
  • Carpal Tunnel
  • Fibromyalgia
  • Soft Tissue Stretch
  • Impingement Syndrome
  • Calcific Tendonitis
  • Perineal Pain (Persistent)
  • Perineal Pain (Partum)
  • Pain relief
  • Oedema
  • Stimulate local bloodflow
  • OA Knee
  • Chronic low back pain
  • Acute low back pain
  • Fibromyalgia
  • Trigger points
  • Post operative knee pain
  • Fracture healing
  • Stress incontinence
  • Urge incontinence
  • Constipation (children)
Technical
  • General Size (h/w/d) 108 x 237 x 333 mm
  • Weight: 1.5 kg
  • Treatment Programs: 10 users-defined set-ups
Ultrasound
  • Frequency: 1.1 & 3MHz
  • Maximum Intensity: 1.5 W/cm2 in CW, 3.0W/cm2 pulsed
  • Maximum Output Power: 6W average
  • Output Modes: CW and pulsed 1:1, 1:2, 1:4, and 1:9
  • Pulse Duration: 2 ms
  • Contact Monitor: Light
  • Transducer: Large transducer ERA 4 cm2, Small transducer 1MHz 0.6 cm2 and 3MHz 0.4 cm2
Interferential
  • 2 or 4-pole Carrier Frequency: 2, 4 or 8 kHz
  • AMF 0-250 Hz
  • Swing Pattern: 1|1, 6|6 or 6ˆ6
  • Vector 10s
  • Output type: CC 0-100mA peak, CV, 0-70V peak
  • Output Channels: 2
Russian Stimulation
  • Carrier Frequency: 2.5 kHz
  • Modulation Frequency: 1-100 Hz
  • Surges 1:1 to 1:5
  • Output type: CC, 0-100mA peak CC, 0-70V peak
  • Output Channels: 2
TENS
  • Waveform Asymmetrical, Symmetrical or Sequential
  • Pulse Width: 20-400's
  • Repetition Rate: 1-250 Hz
  • Modulation None, Burst or Surged
  • Output type: CC, 0-100mA peak, CV, 0-60V peak
  • Output Channels: 2
Diadynamic Current
  • Current Types: DF, MF, CP, CPiso, RS, LP
  • Polarity: Positive or Negative,
  • Output type: CC, 0-70mA peak, CV, 0-140V peak
  • Output Channels: 2
Sinusoidal
  • Frequency (AMF): 50kHz
  • Surge Rate: 2 to 30/minutes
  • Surge pattern: Rectangular, Triangular or Trapezoidal
  • Output type: CC, 0-70mA peak, CV, 0-140V peak
  • Output Channels: 2
Faradic
  • Frequency: 50 kHz
  • Surge Rate: 2 to 30/minutes
  • Surge pattern: Rectangular, Triangular or Trapezoidal
  • Output type: CC, 0-70mA peak, CV, 0-140V peak
  • Output Channels: 2
Galvanic
  • Output type: CC, 0-70mA peak, CV, 0-140V peak
  • Polarity: Positive or Negative or Auto-reverse
  • Output Channels: 2
Interrupted Galvanic
  • Pulse Width: 10's to 1's for rectangular, 1's to 1's for other shapes
  • Waveform: Rectangular, Triangular or Trapezoidal
  • Pulse Rate: 1 to 30/minutes
  • Output type: CC, 0-70mA peak, CV, 0-140V peak
  • Output Channels: 2
Träbert
  • Waveform: Rectangular
  • Output type: CC, 0-70mA peak, CV, 0-140V peak
  • Output Cannels: 2
Medi-Wave
  • Waveform 6m differentiated pulse
  • Frequency: 2-60 Hz
  • Modulation: None, Burst, Surged
  • Output type: CC, 0-70mA peak, CV, 0-70V peak
  • Output Cannels: 2
Microcurrent
  • Waveform Square wave (50% duty cycle)
  • Frequency: 1-1000 Hz
  • Output type: CC 0-1mA
  • Output Channels: 2
Standard Accessories
  • large ultrasound treatment head
  • 250ml bottle of coupling medium
  • 2/4 pole patient lead
  • four medium (100 x 70mm) rubber electrode
  • four medium sponge covers
  • four electrode connection cables (blue and yellow)
  • two stretch bandages (1,200 x 75 mm)
Designed and manufactured in the UK

All EMS Physio products are manufactured at Grove Technology Park, ensuring the highest standards of quality are achieved. The company first achieved ISO9001 and ISO13485 accreditation in 1995 and continues to deliver the best in product quality. All products are CE marked in accordance with the EU Medical Device Directive.

Tags

Separate tags with spaces. Wrap multi-word tags in single quotes. Example: 'New York' Manhattan